working eink display
This commit is contained in:
179
local_code/ESP32/epaper2in13.py
Normal file
179
local_code/ESP32/epaper2in13.py
Normal file
@ -0,0 +1,179 @@
|
||||
"""
|
||||
MicroPython Waveshare 2.13" Black/White GDEH0213B1 e-paper display driver
|
||||
https://github.com/mcauser/micropython-waveshare-epaper
|
||||
|
||||
MIT License
|
||||
Copyright (c) 2017 Waveshare
|
||||
Copyright (c) 2018 Mike Causer
|
||||
|
||||
Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||
of this software and associated documentation files (the "Software"), to deal
|
||||
in the Software without restriction, including without limitation the rights
|
||||
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||
copies of the Software, and to permit persons to whom the Software is
|
||||
furnished to do so, subject to the following conditions:
|
||||
|
||||
The above copyright notice and this permission notice shall be included in all
|
||||
copies or substantial portions of the Software.
|
||||
|
||||
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
|
||||
SOFTWARE.
|
||||
"""
|
||||
|
||||
from micropython import const
|
||||
from time import sleep_ms
|
||||
import ustruct
|
||||
|
||||
# Display resolution
|
||||
EPD_WIDTH = const(128)
|
||||
EPD_HEIGHT = const(250)
|
||||
# datasheet says 250x122 (increased to 128 to be multiples of 8)
|
||||
|
||||
# Display commands
|
||||
DRIVER_OUTPUT_CONTROL = const(0x01)
|
||||
# Gate Driving Voltage Control 0x03
|
||||
# Source Driving voltage Control 0x04
|
||||
BOOSTER_SOFT_START_CONTROL = const(0x0C) # not in datasheet
|
||||
#GATE_SCAN_START_POSITION = const(0x0F) # not in datasheet
|
||||
DEEP_SLEEP_MODE = const(0x10)
|
||||
DATA_ENTRY_MODE_SETTING = const(0x11)
|
||||
#SW_RESET = const(0x12)
|
||||
#TEMPERATURE_SENSOR_CONTROL = const(0x1A)
|
||||
MASTER_ACTIVATION = const(0x20)
|
||||
#DISPLAY_UPDATE_CONTROL_1 = const(0x21)
|
||||
DISPLAY_UPDATE_CONTROL_2 = const(0x22)
|
||||
# Panel Break Detection 0x23
|
||||
WRITE_RAM = const(0x24)
|
||||
WRITE_VCOM_REGISTER = const(0x2C)
|
||||
# Status Bit Read 0x2F
|
||||
WRITE_LUT_REGISTER = const(0x32)
|
||||
SET_DUMMY_LINE_PERIOD = const(0x3A)
|
||||
SET_GATE_TIME = const(0x3B)
|
||||
#BORDER_WAVEFORM_CONTROL = const(0x3C)
|
||||
SET_RAM_X_ADDRESS_START_END_POSITION = const(0x44)
|
||||
SET_RAM_Y_ADDRESS_START_END_POSITION = const(0x45)
|
||||
SET_RAM_X_ADDRESS_COUNTER = const(0x4E)
|
||||
SET_RAM_Y_ADDRESS_COUNTER = const(0x4F)
|
||||
TERMINATE_FRAME_READ_WRITE = const(0xFF) # not in datasheet, aka NOOP
|
||||
|
||||
BUSY = const(1) # 1=busy, 0=idle
|
||||
|
||||
class EPD:
|
||||
def __init__(self, spi, cs, dc, rst, busy):
|
||||
self.spi = spi
|
||||
self.cs = cs
|
||||
self.dc = dc
|
||||
self.rst = rst
|
||||
self.busy = busy
|
||||
self.cs.init(self.cs.OUT, value=1)
|
||||
self.dc.init(self.dc.OUT, value=0)
|
||||
self.rst.init(self.rst.OUT, value=0)
|
||||
self.busy.init(self.busy.IN)
|
||||
self.width = EPD_WIDTH
|
||||
self.height = EPD_HEIGHT
|
||||
|
||||
LUT_FULL_UPDATE = bytearray(b'\x22\x55\xAA\x55\xAA\x55\xAA\x11\x00\x00\x00\x00\x00\x00\x00\x00\x1E\x1E\x1E\x1E\x1E\x1E\x1E\x1E\x01\x00\x00\x00\x00\x00')
|
||||
LUT_PARTIAL_UPDATE = bytearray(b'\x18\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x0F\x01\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00')
|
||||
|
||||
def _command(self, command, data=None):
|
||||
self.dc(0)
|
||||
self.cs(0)
|
||||
self.spi.write(bytearray([command]))
|
||||
self.cs(1)
|
||||
if data is not None:
|
||||
self._data(data)
|
||||
|
||||
def _data(self, data):
|
||||
self.dc(1)
|
||||
self.cs(0)
|
||||
self.spi.write(data)
|
||||
self.cs(1)
|
||||
|
||||
def init(self):
|
||||
self.reset()
|
||||
self._command(DRIVER_OUTPUT_CONTROL)
|
||||
self._data(bytearray([(EPD_HEIGHT - 1) & 0xFF]))
|
||||
self._data(bytearray([((EPD_HEIGHT - 1) >> 8) & 0xFF]))
|
||||
self._data(bytearray([0x00])) # GD = 0 SM = 0 TB = 0
|
||||
self._command(BOOSTER_SOFT_START_CONTROL, b'\xD7\xD6\x9D')
|
||||
self._command(WRITE_VCOM_REGISTER, b'\xA8') # VCOM 7C
|
||||
self._command(SET_DUMMY_LINE_PERIOD, b'\x1A') # 4 dummy lines per gate
|
||||
self._command(SET_GATE_TIME, b'\x08') # 2us per line
|
||||
self._command(DATA_ENTRY_MODE_SETTING, b'\x03') # X increment Y increment
|
||||
self.set_lut(self.LUT_FULL_UPDATE)
|
||||
|
||||
def wait_until_idle(self):
|
||||
while self.busy.value() == BUSY:
|
||||
sleep_ms(100)
|
||||
|
||||
def reset(self):
|
||||
self.rst(0)
|
||||
sleep_ms(200)
|
||||
self.rst(1)
|
||||
sleep_ms(200)
|
||||
|
||||
def set_lut(self, lut):
|
||||
self._command(WRITE_LUT_REGISTER, lut)
|
||||
|
||||
# put an image in the frame memory
|
||||
def set_frame_memory(self, image, x, y, w, h):
|
||||
# x point must be the multiple of 8 or the last 3 bits will be ignored
|
||||
x = x & 0xF8
|
||||
w = w & 0xF8
|
||||
|
||||
if (x + w >= self.width):
|
||||
x_end = self.width - 1
|
||||
else:
|
||||
x_end = x + w - 1
|
||||
|
||||
if (y + h >= self.height):
|
||||
y_end = self.height - 1
|
||||
else:
|
||||
y_end = y + h - 1
|
||||
|
||||
self.set_memory_area(x, y, x_end, y_end)
|
||||
self.set_memory_pointer(x, y)
|
||||
self._command(WRITE_RAM, image)
|
||||
|
||||
# replace the frame memory with the specified color
|
||||
def clear_frame_memory(self, color):
|
||||
self.set_memory_area(0, 0, self.width - 1, self.height - 1)
|
||||
self.set_memory_pointer(0, 0)
|
||||
self._command(WRITE_RAM)
|
||||
# send the color data
|
||||
for i in range(0, self.width // 8 * self.height):
|
||||
self._data(bytearray([color]))
|
||||
|
||||
# draw the current frame memory and switch to the next memory area
|
||||
def display_frame(self):
|
||||
self._command(DISPLAY_UPDATE_CONTROL_2, b'\xC4')
|
||||
self._command(MASTER_ACTIVATION)
|
||||
self._command(TERMINATE_FRAME_READ_WRITE)
|
||||
self.wait_until_idle()
|
||||
|
||||
# specify the memory area for data R/W
|
||||
def set_memory_area(self, x_start, y_start, x_end, y_end):
|
||||
self._command(SET_RAM_X_ADDRESS_START_END_POSITION)
|
||||
# x point must be the multiple of 8 or the last 3 bits will be ignored
|
||||
self._data(bytearray([(x_start >> 3) & 0xFF]))
|
||||
self._data(bytearray([(x_end >> 3) & 0xFF]))
|
||||
self._command(SET_RAM_Y_ADDRESS_START_END_POSITION, ustruct.pack("<HH", y_start, y_end))
|
||||
|
||||
# specify the start point for data R/W
|
||||
def set_memory_pointer(self, x, y):
|
||||
self._command(SET_RAM_X_ADDRESS_COUNTER)
|
||||
# x point must be the multiple of 8 or the last 3 bits will be ignored
|
||||
self._data(bytearray([(x >> 3) & 0xFF]))
|
||||
self._command(SET_RAM_Y_ADDRESS_COUNTER, ustruct.pack("<H", y))
|
||||
self.wait_until_idle()
|
||||
|
||||
# to wake call reset() or init()
|
||||
def sleep(self):
|
||||
self._command(DEEP_SLEEP_MODE)
|
||||
self.wait_until_idle()
|
||||
|
||||
71
local_code/ESPHome/configuration.yaml
Normal file
71
local_code/ESPHome/configuration.yaml
Normal file
@ -0,0 +1,71 @@
|
||||
external_components:
|
||||
- source: my_components
|
||||
components: [waveshare_epaper]
|
||||
|
||||
esphome:
|
||||
name: doorwhat
|
||||
friendly_name: doorwhat
|
||||
|
||||
esp32:
|
||||
board: esp32dev
|
||||
framework:
|
||||
type: esp-idf
|
||||
|
||||
# Enable logging
|
||||
logger:
|
||||
|
||||
# Enable Home Assistant API
|
||||
api:
|
||||
encryption:
|
||||
key: "gLfRXKqMU9IvvwZnIdrWYIclAnc4q5sHVwTkRzUxKyw="
|
||||
|
||||
ota:
|
||||
- platform: esphome
|
||||
password: "1618b7dc423684c5d3661481ce284359"
|
||||
|
||||
wifi:
|
||||
ssid: !secret wifi_ssid
|
||||
password: !secret wifi_password
|
||||
|
||||
# Enable fallback hotspot (captive portal) in case wifi connection fails
|
||||
ap:
|
||||
ssid: "Doorwhat Fallback Hotspot"
|
||||
password: "KBiNyP7EkHCJ"
|
||||
|
||||
captive_portal:
|
||||
|
||||
sensor:
|
||||
- platform: homeassistant
|
||||
entity_id: sensor.shellyhtg3_8cbfeaa53d88_humidity
|
||||
id: bad_feuchtigkeit
|
||||
|
||||
spi:
|
||||
clk_pin: 2
|
||||
mosi_pin: 15
|
||||
|
||||
|
||||
color:
|
||||
- id: red
|
||||
hex: "FF0000"
|
||||
- id: black
|
||||
hex: "FFFFFF"
|
||||
|
||||
display:
|
||||
- platform: waveshare_epaper
|
||||
model: 2.90in3c
|
||||
cs_pin: 4
|
||||
dc_pin: 16
|
||||
reset_pin: 17
|
||||
busy_pin: 5
|
||||
rotation: 270
|
||||
reset_duration: 2ms
|
||||
update_interval: 30s
|
||||
lambda: !lambda |-
|
||||
it.print(0, 4, id(my_font), id(black), "DoorWhat v0.1");
|
||||
it.print(0, 40, id(my_font), id(red), "Mehr kommt demnaechst");
|
||||
it.printf(0, 80, id(my_font), id(red), "Feuchtigkeit Bad %.1f", id(bad_feuchtigkeit).state);
|
||||
|
||||
font:
|
||||
- file: "gfonts://Roboto"
|
||||
id: my_font
|
||||
size: 20
|
||||
Reference in New Issue
Block a user